To request a callback, please fill in the form below
3M Face Fit Testing Kit - FT10 (Sweet)
Our 3M FT10 Face Fit Test Kit is compatible for FFP1, FFP2, FFP3 filtering face pieces and half facemask respirators fitted with particulate or combined filters. The sweet face fit testing kit should be used where persons are unable to detect the bitter sensitivity solutions used in the more popular and widely used 3M FT30 Face Fit Testing Kit - Bitter
The 3M FT10 Face Fit Testing Kit is a low cost, high quality option which requires no expensive training courses and instantly confirms whether or not the respirator is providing a satisfactory seal on the face. It provides an essential piece of equipment under the COSHH Regulations to help demonstrate compliance with the requirements for face fit testing.
- Sweet Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators
- Face Fit Testing is a Mandatory requirement under the Control of Substances Hazardous to Health Regulations 2002 (COSHH)
- Inexpensive and Simple to use
- Includes Sweet sprays (Sensitivity and Testing Solutions)
- No Calibration of equipment required
- Detection makes wearer feel more involved in the test
- No modification of facepiece required
- Test operator can be self-taught
Health and Safety Law requires anyone using respirators, including disposable single use respirators, to complete a face fit test to ensure that the respirators properly fit the face of the wearer and therefore provide the best level of protection. A poorly fitted respirator offers little or no protection to the wearer and so the completion of Face Fit Testing for users of respirators is Essential.
Our 3M FT10 Sweet Face Fit Testing Kit Includes - Hood & Collar, 2 Nebulisers, Sensitivity solution, Fit test solution, Laminated user instructions.
3m FT10 Face Fit Testing Kit - Sweet