3M Face Fit Testing Kit Bitter (FT30)

3M Face Fit Testing Kit - FT30 (Bitter)

3M FT30 Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters.

• Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators
• Mandatory requirement under the Control of Substances Hazardous to Health Regulations 2002 (COSHH)
• Inexpensive
• Simple to use
• Includes Bitter sprays
• No Calibration of equipment required
• Detection makes wearer feel more involved in the test
• No modification of facepiece required
• Test operator can be self-taught

Health and Safety Law requires anyone using respirators, including disposable single use respirators to have a face fit test carried out to ensure that the respirators properly fit the face of the wearer and therefore provide the desired level of protection.  A poorly fitted respirator offers little or no protection to the wearer and so the completion of Face Fit Testing for users of respirators is Essential.

The 3M Face Fit Testing Kit provides an essential piece of equipment under the COSHH Regulations to help demonstrate compliance with the requirements for face fit testing, it is a low cost option which requires no expensive training courses and instantly confirms whether or not the respirator is providing a satisfactory seal on the face.

Face Fit Testing Kit Includes - Hood & Collar, 2 Nebulisers, Sensitivity solution, Fit test solution, Laminated user instructions